				READ ME FIRST

The programs and information contained on this media are Copyright (c) 1993
Ziff-Davis Publishing Company, a division of Ziff Communications Company
("Ziff").  All Rights Reserved.  

BEFORE INSTALLING, USING OR REPRODUCING THE CONTENTS OF THIS MEDIA, YOU MUST 
AGREE TO THE TERMS AND CONDITIONS OF THE ZIFF LICENSE AGREEMENTS, WHICH CAN
BE FOUND BELOW.  BY INSTALLING, USING OR REPRODUCING THE CONTENTS OF THIS
MEDIA, YOU ARE AGREEING TO THE TERMS AND CONDITIONS OF THE LICENSE
AGREEMENTS.

If you do not agree to the terms and conditions of the Ziff License
Agreements, please destroy or return the media to the Ziff-Davis Benchmark
Operation, One Copley Parkway, Suite 510, Morrisville, NC  27560.

WinBench and WinMark are trademarks of Ziff Communications Company.

WINBENCH(tm) SOFTWARE LICENSE AGREEMENT

READ THIS AGREEMENT carefully before using this software.  By using this
software you agree to be bound by the terms of this Agreement.  If you do not
agree to the terms of this Agreement, promptly return this software (or, if
downloaded, do not use this software) and any accompanying items (including
documentation and container) to the Ziff-Davis Benchmark Operation at the
address below.

The WinBench(tm) software and its related documentation (collectively, the
Software") encoded on this physical media (or available through an on-line
access service) is copyrighted, and all rights are reserved by Ziff-Davis
Publishing Company, a division of Ziff Communications Company ("ZIFF").

Limited License.

ZIFF grants you the non-transferable right to use the Software on a single
dedicated computer or a file server networked with multiple PCs solely for
internal use and evaluation purposes.  You may also publish the test results
obtained by you from use of the Software, provided with each such result you:

     A.   Identify ZD Labs, the name and version number of the benchmark 
     Software used (i.e., ZD Labs' WinBench(tm) Ver.  3.11).

     B.   Identify the exact name, processor speed and type, amount of RAM,
     amount of secondary RAM cache, if any, hard disk size, type of hard disk
     controller, and size of hardware hard disk cache, if any, of the PC used
     for the test (e.g., WXY Corp. Model 466 with 66-MHz Intel 486DX2-66 CPU,
     8MB of RAM, 64KB RAM cache, 200MB hard disk, IDE controller, and no
     hardware disk cache).

     C.   Identify the exact video adapter name, amount and type of RAM on it,
     video driver name and date, and monitor refresh rate that produced the
     result (e.g., XYZ Corp. XYZVideo adapter with 2MB VRAM, XYZ.DRV Version
     1.1 driver dated 11 Feb 1993, and a monitor refresh rate of 72 Hz).

     D.   Identify the operating system version (e.g., MS-DOS 5.0), size and
     type of software disk cache, if any (e.g., SMARTDRV 2MB cache), video
     resolution and color depth (e.g., 800 by 600 pixels with 256 colors),
     and any other special conditions used to achieve the result (e.g., disk
     compression utility ABC Version 1.0 enabled).

     E.   State that all products used in the test were shipping versions
     available to the general public.

     F.   State that the test was performed without independent
     verification by ZIFF.

     G.   Follow proper trademark usage and acknowledge ZIFF's trademark
     rights (e.g., "[ ] achieved a 4.5 million Graphics WinMark(tm) test
     score.  WinBench(tm) and WinMark(tm) are trademarks of Ziff Communications
     Company").

In addition, you may either (a) make one copy of the Software solely for
backup or archival purposes, or (b) transfer a copy of the Software across a
network to PCs attached to that network.  This license and your right to use
the Software automatically terminate if you fail to comply with any provision
of this Agreement.  Upon such termination, you agree to destroy all copies of
the Software in your possession or under your control.

Restrictions.

I.   You may not rent, lease, sell, sublicense, assign or otherwise transfer
the Software or this license.

II.  You may not reverse engineer, decompile, disassemble, merge, modify,
include in other software or translate the Software, or use the Software for
any commercial purposes, except for the publication of test results, as
provided above.

III. You may not remove or obscure ZIFF's copyright and trademark notices.

Limited Warranty and Limited Liability.

THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE RESULTS AND
PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU, AND ZIFF ASSUMES NO
RESPONSIBILITY FOR THE ACCURACY OR APPLICATION OF OR ERRORS OR OMISSIONS IN
THE SOFTWARE.  IN NO EVENT SHALL ZIFF BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
THE SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
SPECIFICALLY, ZIFF IS NOT RESPONSIBLE FOR ANY COSTS INCLUDING, BUT NOT LIMITED
TO THOSE INCURRED AS A RESULT OF LOST PROFITS OR REVENUE, LOSS OF USE OF THE
SOFTWARE, LOSS OF DATA OR EQUIPMENT, THE COSTS OF RECOVERING SOFTWARE, DATA OR
EQUIPMENT, THE COST OF SUBSTITUTE SOFTWARE OR DATA, CLAIMS BY THIRD PARTIES,
OR FOR OTHER SIMILAR COSTS.  ZIFF WARRANTS THE ORIGINAL PHYSICAL MEDIA
DISTRIBUTED BY ZIFF TO BE FREE OF DEFECTS IN MATERIALS AND WORKMANSHIP.
ZIFF'S ENTIRE LIABILITY AND THE USER'S EXCLUSIVE REMEDY SHALL BE REPLACEMENT
OF THE DEFECTIVE ORIGINAL PHYSICAL MEDIA.  THE WARRANTIES AND REMEDIES SET
FORTH HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHERS, ORAL OR WRITTEN, EXPRESS
OR IMPLIED.  NO ZIFF AGENT OR EMPLOYEE, OR THIRD PARTY, IS AUTHORIZED TO MAKE
ANY MODIFICATION OR ADDITION TO THIS WARRANTY.  SOME STATES DO NOT ALLOW
EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR LIMITATION OF LIABILITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES; SO THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU.

U.S. Government Restricted Rights.

The Software is provided with RESTRICTED RIGHTS.  Use, duplication or
disclosure by the Government is subject to restrictions as set forth in
subparagraph (C)(1)(ii) of the Rights in Technical Data and Computer Software
Clause at DFARS 48 CFR 252.277-7013 for DoD contracts and 52.227-19(a) -(d)
for civilian agency contracts.  Contractor/manufacturer is the Ziff-Davis
Benchmark Operation, One Copley Parkway, Suite 510, Morrisville, North
Carolina 27560.

General.

ZIFF retains all rights not expressly granted.  Nothing in this license
constitutes a waiver of ZIFF's rights under the U.S Copyright Act or any other
Federal, state or foreign law.  You are responsible for installation,
management, and operation of the Software.  This Agreement, including the
limited warranty and limited liability, shall be construed, interpreted and
governed under New York law.

INTRODUCTION

WinBench
Version 3.11
Release date: February 1993

WinBench(tm) is the PC Magazine Windows Benchmark suite.  It provides
comprehensive graphics benchmark tests using the Windows Graphical Device
Interface (GDI) and selected high-level user interface functions. Version 3.1,
the fourth major release of WinBench, added tests of hard disk subsystems.
Version 3.11 is a maintenance release.

WHAT YOU NEED TO RUN WINBENCH

To run WinBench, you need to have the following hardware and software.

WinBench requires:

      . A PC that runs Windows 3.0 or 3.1
      . A  graphics adapter and Windows driver capable of a resolution of at
	least 640x480 pixels.  Correct operation and accurate results from
	running WinBench are not guaranteed if the tested graphics resolution
	is less than either 640 pixels wide or 480 pixels high.
      . About 300,000 bytes available on your hard disk for the WinBench
	software itself
      . About 9 million bytes of available space on your hard disk for a
	temporary file to run the WinBench disk tests, and to save the results
	of any WinBench tests that you run.  If your hard disk does not have
	enough space for the work file, WinBench will not run the hard disk
	tests.
      . MS-DOS Release 3.1 or later (Release 5.0 recommended)
      . Microsoft Windows 3.0 or later (Release 3.1 or later recommended),
	running in either Standard or Enhanced mode.

BACKGROUND

WinBench 3.11 and the Graphics WINMARK reflect how the leading Windows
applications use the Windows environment.  We used Microsoft Test to capture
repeatable scripts that represent typical use of eight Windows applications
which are market leaders in their respective product categories.  Then, we ran
the scripts on standard configurations using Microsoft's Logger and Profiler
tools to record information about the Windows functions used by these
applications.  Finally, we analyzed the log and profile data to construct a
composite picture of the most frequently used GDI functions and the
characteristics of these functions.

Ziff-Davis Publishing Company is committed to provide the PC industry with
high quality state-of-the-art benchmark software.  The Ziff-Davis Benchmark
Operation carries out the on-going mission to develop benchmarks by
instrumenting and analyzing how major Windows applications use the Windows
environment, using the best profiling and instrumentation tools available.
Subsequent releases of WinBench may reflect adjustments in both the functions
used and their weights, depending on the results of the analysis.

INSTALLING WINBENCH

WinBench is distributed as a pair of files: this README file and a
self-extracting executable file, WINB311.EXE.  The self-extracting file
contains WINBENCH.EXE, the benchmark program itself, and WINBENCH.HLP,
the on-line help for WinBench.

You will probably want to create a directory that contains the WinBench files,
and that will contain all of the report files generated by WinBench.  For
example, you could use the following DOS commands to create the WINBENCH
directory on your C: drive, and to change to that directory:

	MD C:\WINBENCH
	CD C:\WINBENCH

Then, execute the self-extracting WINB31 program to install all of the
files from the WinBench diskette. If the WinBench diskette is in the
A: drive of your PC, and you created the WINBENCH directory as
shown above, do the following command:

	A:WINB311

Finally, copy this file to the same directory:

	COPY A:README

HOW TO USE WINBENCH

You launch WinBench just like any other Windows application:

1.  After installing WinBench as shown above, you may execute the DOS
command:

	WIN WINBENCH

2. You may open up the file manager, go to the WinBench directory on your C:
drive, and double-click on WINBENCH.EXE.

For other instructions, see the on-line help for WinBench.

PRODUCT SUPPORT

You may FAX your questions to the Ziff-Davis Benchmark Operation at 
(919) 380-2879.  Or, send mail to:

Ziff-Davis Benchmark Operation
One Copley Parkway, Suite 510
Morrisville, NC 27560.  

